LG M2280D-PU - HD RECEIVER SETUP

To Next Page

To Previous Page

EXTERNAL EQUIPMENT SETUP

HD RECEIVER SETUP

Connecting with a Component Cable

■ To prevent damage, never plug in any power cords until you have finished connecting all equipment.

■ The image shown may be somewhat different from your Monitor set.

► HDMI Audio Supported formats: Dolby Digital, PCM

DTS Audio format is not supported.

Signal Component HDMI

480i / 576i YES No

480p / 576p YES YES

720p / 1080i YES YES

1080p

YES

(50 Hz / 60Hz only)

YES

(24 Hz / 30 Hz / 50Hz / 60Hz)

Connect the video outputs (Y, PB, PR) of the digital

set-top box to the COMPONENT IN VIDEO jacks on

the Monitor set.

Connect the audio output of the digital set-top box

to the COMPONENT IN AUDIO jacks on the

Monitor set.

Turn on the digital set-top box. (Refer to the owner’s

manual for the digital set-top box.)

Select COMPONENT input source using the INPUT

button on the remote control.

Other manuals for LG M2280D-PU