30
Adjusting the timer function
User Menus
Move
TIME
OK
Clock
Off Time : Off
On Time : Off
Sleep Timer : Off
Auto Off : On
Power On Delay : Off
Clock
Clock
If the current time is incorrect, reset the clock manually.
1) Press the MENU button and then use
Time menu.
2) Press the
X
button and then use
Clock menu.
3) Press the X button and then use
4) Press the X button and then use
On/Off time
The off time automatically switches the set to standby at the pre-set time.
1) Press the MENU button and then use
Time menu.
2) Press the X button and then use
On/Off Timer
.
3) Press the X button and then use
4) Press the X button and then use
5) Press the X button and then use
On or Off.
6) Press the X button and then use
Select input or On Timer
Sleep timer
The power is automatically turned off when the time set by a user is passed.
1) Press the MENU button and then use
Sleep Timer
menu.
2
) Press the X button and then use
3) Press the X button and then use
Auto off
If Auto off is active and there is no input signal, the set switches to off mode automatically after
10 minutes.
1) Press the MENU
button to select the
Auto
off menu.
2) Press the X button and then use
On or Off.
Power on delay
When connecting multiple monitors and turning the power on, the monitors are turned
on individually to prevent overload.
In the event of power interruption (disconnection or power failure), the clock must be reset.
Once the on or off time is set, these functions operate daily at the preset time.
Off time function overrides On time function if they are set to the same time.
When On time is operated, input screen is turned on as it was turned off.
Note
To Next Page
Loading...
Need help?
General
