LG MDS64V User Manual

Operating 27
Operating
3
Radio Operations
Be sure that both FM and AM aerials are connected.
(Refer to the page 13)
Listening to the radio
1. Press FUNCTION on the remote control or
TUNER on the unit until FM or AM appears in
the display window. The last received station is
tuned in.
2. Press and hold TUNING (-/+) on the unit or
TUN.(-/+) on the remote control for about two
seconds until the frequency indication starts to
change, then release. Scanning stops when the
unit tunes in a station.
Or
Press TUNING (-/+) on the unit or
TUN.(-/+) on the remote control repeatedly.
3. Adjust the volume by rotating Volume knob on
the front panel or by pressing VOL (-/+) on the
remote control repeatedly.
Presetting the Radio Stations
You can preset 50 stations for FM and AM.
Before tuning, make sure that you have turned
down the volume.
1. Press FUNCTION on the remote control or
TUNER on the unit until FM or AM appears in
the display window.
2.
Select the desired frequency by using TUNING
(-/+) on the unit or pressing TUN.(-/+) on the
remote control.
3. Press PROG./MEMO. preset number will flash in
the display window.
4. Press PRESET (
W
/
S
) to select the preset
number you want.
5. Press PROG./MEMO.
The station is stored.
6. Repeat the steps 2 to 5 to store other stations.
7. To listen a preset station, press
PRESET (
W
/
S
).
Deleting all the saved stations
1. Press and hold PROG./MEMO. for two seconds.
“ERASE ALL” will flash up on the unit display.
2. Press PROG./MEMO. to erase all saved radio
stations.
Improving poor FM reception
Press PLAY (
d
), MO./ST. on the remote control.
This will change the tuner from stereo to mono and
usually improve the reception.
MBD66-A0U_BLKALL_ENG_0739.indd 27 2012-01-06 �� 4:42:59

LG MDS64V Specifications

General

Brand	LG
Model	MDS64V
Category	Stereo System
Language	English