Owner’s Manual 21
Operation
1. Press the MTS button repeatedly.
Stereo/SAP
Stereo/SAP
Broadcasts Setup
Broadcasts Setup
• Select mono sound mode if the signal is not clear or in poor signal reception areas.
• Stereo, SAP modes are available only if included on the broadcast signal.
Mono Stereo SAP
- The TV can receive MTS stereo programs and any SAP (Secondary Audio Program) that accompanies the
stereo program; if the broadcaster transmits one additional sound signal in addition to the original one.
- Mono: The primary language is heard from left and right speakers. Signal mode is mono.
- Stereo: The primary language is heard from left and right speakers. Signal mode is stereo.
- SAP: The secondary language is heard from left and right speakers in mono sound.
1.
Press the MENU button and then use
D / E
button to select the SOUND menu.
2. Press the G button and then use
D / E
button to select the desired sound option
(
Balance, Treble, Bass).
3. Press the G button and then use F / G button to make appropriate adjustments.
4. Press the ENTER button to save.
Manual Sound Control (
Manual Sound Control (DASP
set to
set to Off
option)
option)
- You can adjust sound options Balance, Treble, and Bass to the levels you prefer.
SOUND
Prev.
DASP
BBE
AVL
Balance 0G
Treble 50
Bass 50
SOUND
Menu
To Next Page
Loading...
