26 Plasma TV
Operation
CHANNEL
PICTURE
SOUND
TIMER
SPECIAL
SCREEN
PIP/DW
Prev.
Menu
TV
VCR
Screen adj. G
ARC
Cinema
YNR
Reset
Screen
Screen
Adjustments (V
Adjustments (V
ideo1-2 and Component 480i mode only)
ideo1-2 and Component 480i mode only)
- Use this function to correct jittering or picture instability while viewing a video
tape.
1. Press the MENU button and then use
D / E
button to select the SCREEN menu.
2. Press the G button and then use
D / E
button to select Screen adj..
3. Press the G button and then use
D / E
button to select TV or VCR.
• Select the VCR option if watching a VCR.
• Select the TV option for other equipment. (Except VCR)
4. Press the ENTER button to save.
- Sets up the TV for the best picture appearance for viewing movies.
1. Press the MENU button and then use
D / E
button to select the SCREEN menu.
2. Press the
G button and then use
D / E
button to select Cinema..
3. Press the G button and then use
D / E
button to select On or Off.
4. Press the ENTER button to save.
Cinema Mode Setup (V
Cinema Mode Setup (V
ideo1-2 and Component 480i mode only)
ideo1-2 and Component 480i mode only)
Manual Configure (RGB-PC mode only)
Manual Configure (RGB-PC mode only)
1. Press the MENU button and then use
D / E
button to select the SCREEN menu.
2. Press the G button and then use
D / E
button to select Manual config..
3. Press the G button and then use
D / E
button to to select Phase or Clock.
4. Use the
F / G button to make appropriate adjustments.
• The Phase adjustment range is 0 ~ 30.
• The Clock adjustment range is -127 ~ +128.
5. Press the ENTER button to save.
Selecting VGA
Selecting VGA
Mode (RGB-PC mode only)
Mode (RGB-PC mode only)
- To see a normal picture, match the resolution of RGB mode and selection of
VGA mode.
1. Press the MENU button and then use
D / E
button to select the SCREEN menu.
2. Press the G button and then use
D / E
button to select VGA Mode.
3. Press the G button and then use
D / E
button to select the desired VGA resolu-
tion.
4. Press the ENTER button to save.
SCREEN
Prev.
Auto config.
ARC
Position
Manual config G
Reset
SCREEN
Menu
Phase 0
Clock 0
SCREEN
Prev.
Auto config.
ARC
Position
Manual config
Reset
VGA Mode G
SCREEN
Menu
640x480
848x480
852x480
SCREEN
Prev.
Screen adj.
ARC
Cinema G
YNR
Reset
SCREEN
Menu
On
Off
To Next Page
Loading...
