Pasts of Corrosion Resistance
Ocean Black Fin' Heat Exchanger Epoxy resin + Hydrophilic film (Ocean Black Fin)
Barrier Epoxy + polyester : 120μ ± 20μ
Front/Side/Top/Rear Panel & Rear Grille Epoxy + polyester : 120μ ± 20μ
Base Pan Epoxy + polyester : 120μ ± 20μ
Screws Stainless steel
Part that contacts
corrosive air
Part that passes
through the
corrosive air
Pasts of Corrosion Resistance
Sea wind
Windbreak
Sea wind
Sea wind
3) Ensure the distance between the outdoor unit and the sea shore is more than 300 m and less than 1 km.
It is recommended that the outdoor unit is located over 300 m from the sea.
To Next Page
Loading...
