LG MW242H4 - Outdoor Unit

14
EN
Outdoor Unit
1
Remove the access door from the unit by
loosening the screw. Connect the wires to the
terminals on the control board individually as
follows.
• After loosening the screws sufficiently, insert
the wires. After that, be sure to tighten the
screws and secure with clamps.
Type 1
N1L
Type 2
N1L3L2L
2
Secure the power cord onto the control with
cable clamp.
3
Reinstall the access door to the original position
with the screw.
4
Use a recognized circuit breaker for 24 K model
between the power source and the unit. A
disconnecting device to adequately disconnect
all supply lines must be fitted.
Front panel
Indoor unit
Outdoor unit
Chassis
Cabinet
Access
door
Terminal
(inside)
Terminal (inside)
NOTE
• The figures in this manual are based on the
external view of a standard model. Consequently,
the shape may differ from that of the air
conditioner you have selected.