Getting Started 11
4. Remove theWall Mount Bracket Installation
Template.
Fix it with screws as shown in the illustration
below.
¢¢
..... j._ Caution
* Do not install this unit upside down. It can
damage the parts of this unit or be the
cause of personal injury.
Do not hang onto the installed unit and
avoid any impact to the unit.
Secure the unit firmly to the wall so that it
does not fall off. ffthe unit falls off, it may
result in an injury or damage to the product.
When the unit is installed on a wall, please
make sure that a child does not pull any of
connecting cables, as it may cause it to fall.
- @ Note
Detach the unit from the bracket as shown
below.
©
6. Hang the main unit onto the bracket as shown
below.
To Next Page
Loading...
Need help?
General
