Operating19
Basic operations Other operations
USB operation
1. Connect the USB device to the USB port.
2. Select the USB function by pressing FUNCTION.
3. Select a file you want to play by pressing
Stop Press Im.
Playback Press _/11.
Pause During playback, press _/II.
Skip to the next/
previous file
Search for a
section within a
file
Playrepeatedly
or randomly
During playback, press I_
or l_l_l to go to the next file
or to return to the beginning
of the current file.
Press I_ twice briefly to
step back to the previous file.
Press and hold I_ / lb¢_l
during playback and release it
at the point you want to listen
to.
PressREPEATon the remote
control repeatedly, the
display will be changed in the
following order, RPT1÷ RPT
DIR(DIRECTORY)->RPTALL-->
RANDOM->OFR
Press O to 9 numerical Buttons
Select a file
directly on the remote control to go
to the desired file directly.
The unit memorizes the point at
Resume
playback which you've changed function
orthe unit had been turned off.
_i @ Note
he resume point may be cleared when you
ull out the power cord or removing the USB
evice from the unit.
DRC (Dynamic Range Control)
Make the sound clear when the volume is turned
down (Dolby Digital only). Set to [DR(. ON] by using
DRC.
AV Sync
When receiving audio signals from TV, sound and
images may not be matched. In the case, this
function can adjust the delay time.
1. PressAV SYNC.
2. Use I_ / 1_1_1to scroll up and down through
the delay amount, which you can set at
anything between 0 and 300 ms.
Turn off the sound temporarily
Press MUTE_[ to mute your unit.
You can mute your unit, for example, to answer
the telephone,"MUTE'is displayed in the display
window.
To cancel it, press MUTE_I_ again on the remote
control or change the volume level.
Displaying file and input
source
You can display various information of the input
source by pressing INFO.
USB : MP3ANMA containing file information
OPTICAL/ARC/HDMI IN :Audio format, Audio
channel
O
@
5"
Q
To Next Page
Loading...
