Connecting13
.- @ Note
• If you operate main unit then wireless
subwoofer sound within a few seconds in
standby mode.
Set the distance between this unit and
wireless subwoofer within 10 m (32 ft.).
Optimum performance can be
implemented only when the unit and
the Wireless subwoofer within distance
of 2 m (6 ft.) to 10 m (32 ft.) is used since
communication failure may occur if longer
distance is used.
It takes a few seconds (and may take longer)
for the unit and subwoofer to communicate
with each other.
Connecting to your TV
You can listen to the sound from your TV via the
unit. There are two ways of connecting your TV to
the unit.
What is SIMPLINK?
o_
(slmpLlrlK
Some functions of this unit are controlled by the
TV's remote control when this unit and LG TV's with
SIMPLINK are connected through HDMI connection.
Controllable functions by LGTV's remote control :
Power on/off, volume up/down, etc.
Refer to theTV owner's manual for the details of
SIMPLINK function.
LGTV's with SIMPLINK function has the logo as
shown above.
Note
Depending on the state of the unit, some
SIMPLINK operation may differ from your
purpose or not work.
Using an HDMI cable
You must connect the TV that supports ARC
function if you want to listen toTV sound using an
HDMI cable. And turn on SIMPLINK of your TV.
(HDMI cable is not included.)
1. Connect the HDMI OUT jack on the back of
the unit to ARC jack on theTV using an HDMI
cable (Type A, High speed HDMI TM cable with
Ethernet).
O
o
g
©
5"
Q
2. Turn TV and the unit on. ARC function is
selected automatically.
To Next Page
Loading...
Need help?
General
