LG NB4532B - HDMI and ARC Details

14 Co_ _ect"ir_g
0
o
©
ARC (Audio Refurn Channel)
funcfion
The ARC function enables an HDMI capable TV to
send the audio stream to HDMI OUT of the unit.
To use this function :
- YourTV must support the HDMPCEC and ARC
function and the HDMPCEC and ARC must be
set to On.
- The setting method of HDMPCEC and ARC may
differ depending on the TV. For details about
ARC function, refer to your TV manual.
- You must use the HDMI cable (Type A, High
Speed HDMI TM cable with Ethernet).
- You must connect the HDMI OUT on the unit
with HDMI IN of theTV that supports ARC
function using an HDMI cable.
- You can connect only one Sound bar toTV
compatible with ARC.
Addifional informafion for
HDMI
When you connect a HDMI or DVI compatible
device make sure of the following:
-Try switching offthe HDMI/DVI device and this
player. Next, switch on the HDMYDVI device
and leave it for around 30 seconds, then switch
on this player.
-The connected device's video input is set
correctly for this unit.
-The connected device is compatible with
720 x 480p, 1280 x 720p, 1920 x 1080i or
1920 x 1080p video input.
Not all HDCP-compatible HDMI or DVI devices
will work with this player.
-The picture will not be displayed properly with
non-H DCP device.