Phone Basics 13
Downloading Data – Indicates that your phone is downloading data.
Download Finished – Indicates that a download is complete.
Connected To VPN – Indicates that the phone is connected to a Virtual Private
Network.
Disconnected From VPN – Indicates that the phone is disconnected from the
Virtual Private Network.
Song Is Playing – Indicates that a song is playing.
Carrier data – Data use threshold approaching or exceeded.
TTY – Indicates that your phone is operating in TTY mode.
Tethering and Hotspot Active - Indicates that both USB tethering and Portable
Wi-Fi hotspot are active.
Portable Wi-Fi hotspot Active - Indicates that Portable Wi-Fi hotspot is active.
Turn Your Phone On and Off
Turn your phone on and off and wake-up the screen by using the Power/Lock Button .
Turn Your Phone On
► Press and hold the Power/Lock Button .
Once your phone is on, it may display “Searching for Service.” When your phone finds a signal,
it enters standby mode – the phone‟s idle state. At this point, you are ready to begin making and
receiving calls.
If your phone is unable to find a signal after 15 minutes of searching, a Power Save feature is
automatically activated. When a signal is found, your phone automatically returns to standby
mode.
In Power Save mode, your phone searches for a signal periodically without your intervention.
You can also initiate a search for Sprint service by pressing any key (when your phone is turned
on).
Tip: The Power Save feature conserves your battery power when you are in an area where
there is no signal.
To Next Page
Loading...
