Phone Calls 41
Call Using the Phone Dialer
The most "traditional" way to place a call is by using the phone's dialer screen.
1. Tap > .
2. Enter a phone number using the on-screen dialpad and tap .
If you enter a wrong number, tap to erase digits one by one.
To erase the entire number, touch and hold .
You can open other applications during a call. The will appear in the Status Bar
while the call is underway.
Press the Up/Down Volume Buttons to adjust the call volume.
Use the on-screen buttons to add another call, put a call on hold, to use the
speakerphone, and for other options, as described in In-Call Options.
3. Tap to end the call.
Tip: To redial your last outgoing call, follow step 1 to access the Dialer, tap the Call logs tab,
locate the call entry and tap .
You can also make calls from your Contacts list, from the Call log, and using Voice Command.
Dialing Options
After entering numbers with the dialpad, you can use the following dialing options.
Tap to view the following options:
To Next Page
Loading...
