EasyManua.ls Logo

LG PDRYCB000 - Installation Safety; In-use Safety

LG PDRYCB000
9 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Important Safety Instructions
Installation Manual 5
Important Safety Instructions
4 Dry Contact
ENGLISH
• Failure to carefully read and follow all
instructions in this manual can result in
equipment malfunction, property damage,
personal injury and/or death.
Installation
• Be sure to request to the service center or
installation specialty store when installing
products. It will cause fire or electric shock
or explosion or injury.
• Request to the service center or installation
specialty store when reinstalling the installed
product. It will cause fire or electric shock or
explosion or injury.
• Do not disassemble, fix, and modify
products randomly. It will cause fire or
electric shock.
• Be sure to turn off power before installation.
It will cause electric shock.
• Installation work must be performed in
accordance with the national wiring
standards by authorized personnel only.
• Always perform grounding. Otherwise, it
may cause electrical shock.
• You need to use a safely insulated power
supply which follows IEC61558-2-6 anc NEC
Class2. If you do not follow, It may cause
fire, electric shock, explosion or injury.
• Securely attach the electrical part cover to
Module. If the electric part cover of Module
is not attached securely, it could result in a
fire or electric shock due to dust, water, etc.
• Make the connections securely so that the
outside force of the cable may not be
applied to the terminals. Inadequate
connection and fastening may generate heat
and cause a fire.
In-use
• Do not place flammable stuffs close to the
product. It will cause fire.
• Do not allow water to run into the product. It
will cause electric shock or breakdown.
• Do not give the shock to the product. It will
cause breakdown when giving the shock to
the product.
• Request to the service center or installation
specialty store when the product becomes
wet. It will cause fire or electric shock.
• Do not give the shock using sharp and
pointed objects. It will cause breakdown by
damaging parts.
• Do not touch the board when the power is
connected. It can cause a fire, electric

Related product manuals