24
EXTERIOR AND DUST SENSOR CLEANING METHOD
ENGLISH
Air outlet cleaning method
1. Hold the wave pattern part of the air
outlet cover, and lift upward to sepa-
rate.
2. Clean the safety grille with the soft
brush and the suction inlet of vacuum
cleaner.
3. Wash the air outlet cover with soft
brush in the running water.
4. When assembling after the cleaning,
settle the front section of the air out-
let cover after inserting the cover rear
section to suit to the product as
shown in the right side figure.
• Clean the air outlet once every 1~2
months. But the cleaning frequency
can differ according to the using
environment and time. So in an en-
vironment where it is dusty, clean
more frequently.
Information
To Next Page
Loading...
