HUMIDIFIER FUNCTION
19
ENGLISH
HUMIDIFIER FUNCTION
This maintains the optimal level of humidity when the indoor air is dry.
Check the assembly condition of
humidifier filter
1. Pull out the water tank.
2. Pull out the tray.
• Carefully lift the tray up to pull it out
without spilling the water.
3. After assembling both ends of the
humidifier filter case to the tray hook
accurately as shown in the picture,
assemble the tray to the main unit.
• If the humidifier is not accurately as-
sembled, it can cause abnormal noise
and the humidifier may not work.
Supplying water to water tank
1. Open the cap of the water tank and
fill tap water to the water tank.
• Fill the water to the water tank to
the level of no water leakage when
the cap is closed.
CAUTION
• Do not use anything other than tap
water. It is difficult for bacteria to
grow in tap water because it is
treated with chlorine. But it is easy
for fungus or bacteria to grow in
other types of water (Well water,
purified water, mineral water etc.).
• Do not use boiled water above
40°C, aroma oil, chemical, contami-
nant and air freshener. (It can cause
malfunction or failure.)
• Because the water tank can fall
over, always hold the water tank
with two hands.
!
To Next Page
Loading...
