LG PJ9 - Speaker Levitating Function; How to Levitate the Speaker; Levitating Mode Precautions

Operating
14
Operating
3
Levitating
Creates visual effect using electromagnets housed
inside the woofer station. Also you can enjoy 360–
degree sound and deep bass of the subwoofer
embedded inside the woofer station.
1. Connect the speaker and woofer station.
Follow the “Setting up the woofer station” on
page 9-10.
2. Press the
button to levitate on woofer
station.
- Speaker : Dual Play LED turns off with sound.
- Woofer station : Mood LED light revolves on.
y
Auto levitating is available when the speaker
is approx 90% charged or overheating.
y
When you press the
button to descend,
levitating is not work automatically.
y
When the speaker is levitating or descending,
it might sound melody to check levitation
status.
,
Note
3. The speaker is levitation completed.
- Woofer station : Mood LED light turns on.
Avoid the cases below. It will bring down the
speaker with loud noise and may cause damage.
y
Do not put any things (especially metal such
as keys or watches) between the speaker and
the woofer station.
y
Do not touch the speaker levitating.
y
Use Bluetooth device to control the speaker
instead of the button on the speaker when it
is levitating.
y
Do not place electronics, magnetic cards, etc
on speaker. It might damage by magnetic eld
generated from the product.
y
Do not put your hand on woofer station
during Levitating. Speaker might fall by impact
or external force.
y
Keep the speaker and the woofer station
distance from magnets or devices containing
magnets to prevent levitation interference.
y
Do not use function at windy place(ex. near
operating fans, out door...)
y
Do not use levitating during connecting
portable or USB cable.
>
Caution