Other Operation
Initializing
When the unit does not operate normally (Bluetooth
pairing, Woofer station connection...), it need to be
initialized.
y
Speaker : Press and hold
j
button for 7 seconds.
Then Power and Bluetooth LED blinks 4 times.
y
Woofer station : Press and hold
button for 7 seconds. Then Mood LED light blinks
4 times.
y
When levitating mode does not work well,
put speaker in a different place and initialize
speaker by
pressing and holding
button on woofer station. Wait 5 seconds
prior to use.
y
When you initialize the speaker or the woofer
station, speaker and woofer station of
connection is disconnected.
,
Note
Resetting
In case that freezes due to malfunction
y
Speaker : Press the reset hole using an object like
a thin pin. Then speaker turns off. Press
1
button
to try turning on speaker again.
Don't use button on speaker for resetting in
levitating mode. (page 14)
>
Caution
y
Woofer station : Unplug the power cord from the
electrical outlet.
Notice for Auto Power Off
When the unit is in Bluetooth mode without music
playback for 15 minutes or in portable input mode
without button operation for 6 hours, this unit is
turned off automatically.
When enter Auto power off mode while
levitating, speaker automatically descends to
woofer station.
,
Note
To Next Page
Loading...
