LG PREMTB001 Owner's Manual

14 Indoor Unit
Installation Instructions
Installer Setting - Installer Setting Code Table
No. Function Function Code Setting Value Remote Controller LCD
0 Mode Override
0 : Set to Master
1 : Set to Slave
1 : Standard
1
2 : Low
3 : High
4 : Super High
0 : Set to Master
Group Control 1 : Set to Slave
2 : Check Master/Slave
3 : Set to Auxiliary heater
Auxiliary heater 4 : Cancel Auxiliary heater
2 : Check Auxiliary heater Installation
Installer Setting Code Table
0
1
2
Ceiling Height
Selection
Mode Override
This Function is only for Non-Auto Changeover H/P model.
Ceiling Height Selection
Indoor unit connected to wired remote controller operate as wired remote controller setting.
Group Control
This function is only for group control. Please don’t set this function in case of non-group control.
After setting Group Control of the product, turn off the power then turn it back on after 1 minute.
Auxiliary heater
This function is only applied to models with Auxiliary Heater function being activated.
2
22
00
01
11
12
13
14
20
21
22
23
24
25
2

LG PREMTB001 Specifications

General

Compatible Devices	LG TVs
Battery Type	AAA
Number of Batteries	2
Color	Black
Connectivity Technology	Infrared