18 Indoor Unit
Owner's Instruction
Set the desired temperature by pressing TEMP button.
Press ROOM TEMPERATURE CHECKING button to check the room
temperature.
When setting the desired temperature is lower than room
temperature, heating wind isn’t blow out.
3
Set the fan speed again. You can select the fan speed in four
steps–low, medium, high, or chaos. Each time the button is pressed,
the fan speed mode is shifted.
4
Press the ON/OFF button.
The unit will respond with beep sound.
1
Press MODE button to select Heating Mode.
2
Heating Mode
This Function is only for H/P model.
(3 s)
˚C / ˚F (5 s)
To lower the temperature
To raise the temperature
h Setting Temp. Range in
Heating Mode : 16~30 °C
(60 °F~86 °F)
• The feature may be changed according to the type of model.
To Next Page
Loading...
Need help?
General
