A Soundbar
C Wireless Subwoofer – Install it close to the soundbar.
B Remote Control Receiver /
D External Device – (Blu-ray player, game console, etc.) Status LED (Refer to below table)
Power on Standby
OPTICAL /
HDMI ARC
Bluetooth
ready
Bluetooth HDMI IN USB
Red blinking Red White Blue blinking Blue White White
1. Connect the soundbar to your TV via an optical cable or an HDMI cable.
2. If you are using an external device (ex. Blu-ray player, game console, etc.), connect it to the soundbar via an HDMI cable.
3. Connect to power in the following order: wireless subwoofer → soundbar. Then, turn on the soundbar. When the connection is
automatically established with the soundbar, the LED on the wireless subwoofer will light up in green.
4. Using the product with your TV
1. Press the Function button repeatedly until the first LED light up in white among the three LEDs.
2. On your TV’s settings set the output speaker to [HDMI ARC], [Optical], or [External Speaker].
5. Connecting the product to your smartphone via Bluetooth
1. Tap the Settings button on your smartphone and select .
Turn on the Bluetooth function. ( )
2. Press the Bluetooth pair button. After a moment, the second LED blinks in blue among the three LEDs.
3. Find and tap the product on your smartphone. The product appears as “LG QP5W / QP5 (XX)”.
6. Connecting to the LG Sound Bar app
1. Find and install the LG Sound Bar app on Google Play or App Store from your smartphone.
2. You can get more information regarding its use by selecting [Help] in [Setting].
If you see a red LED on the bottom of the wireless subwoofer, it means that the soundbar is not connected to the speaker. If
this is the
case, connect them in the following order.
1. Press the Power button on the soundbar to turn it off
2. Press the PAIRING button on the bottom of the wireless subwoofer. Check if each LED blinks green.
– If you still see a red LED on the bottom of the wireless subwoofer, press and hold the button on the bottom of the subwoofer
again.
3. Press the Power button on the soundbar to turn it on.
4. When the connection is established, you will see a green LED light on the bottom of the wireless subwoofer light up in green.
♣ Keep the soundbar, the subwoofer away from the device (ex. wireless router, microwave oven, etc.) over 1 m (3.3 ft) to prevent
wireless
interference.
Design and specifications are subject to change without notice.
Google Play is a trademark of Google LLC.
Contents [ hide
1 Specification
2 File Downloads
3 References
4 Related Manuals
Specification
Power consumption
Refer to the main label.
AC adapter
Model: DA-65F19
Manufacturer: Asian Power Devices Inc.
To Next Page
Loading...
