EasyManua.ls Logo

LG REVERE 2 - Phone ··················11; Getting Started with Your Phone; Step 1. Remove the Back Cover; Step 2. Insert the Battery

LG REVERE 2
130 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11
Getting Started with Your Phone
Step 1. Remove the Back Cover
1. Hold the phone securely with
both hands.
2. Use your thumb to press down
on the indentation near the
bottom of the back cover and
slide the cover upwards to
remove it.
Step 2. Insert the Battery
Align the battery contacts with
the terminals near the top of the
battery compartment and press
down until the battery clicks into
place.
Step 3. Replace the Back Cover
Align the back cover over the
battery compartment and slide it
downwards until it clicks into place.
Step 4. Charge the Phone
Your device comes with a Wall/USB
charger and a USB cable which
connect together to charge your
phone. To charge your phone:
1. Before turning on your phone,
charge it fully. Be sure to use
the charger that came with your
phone.
USB cable
NOTICE: Please make sure that the ‘B’
side face
s up before inserting a charger
or USB cable into the Accessory/Charger
Port of your phone.

Table of Contents

Related product manuals