LG REVERE 2 - Current Country; Security; Edit Codes

71
s When a Location Setting Restriction
is activated in the Security Menu, the
lock code is required when you enter
location menu. The lock code is the
same 4 digits you use as your device
lock code; initially the last 4 digits of
your phone number.
s When in Airplane Mode, service
s
supporting Location On functionality
will be suspended.
7.6 Current Country
The Current Country menu allows
to select your current location.
1. Open the flip and press
[MENU].
2. Press
Settings & Tools.
3. Press
Phone Settings.
4. Press
Current Country.
5. Use the Directional Key
to
highlight a setting, then press
.
NOTE To assure that your phone works
properly while you travel, please verify
the country of your current location,
so the correct Country Code can be
applied.
Once the current country value is set,
the value cannot be changed until next
location change or initialization of all
setting info such as 'Reset Default' or
'Restore Phone'.
7.7 Security
The Security menu allows you to
secure the phone electronically.
1. Open the flip and press
[MENU].
2. Press
Settings & Tools.
3. Press
Phone Settings.
4. Press
Security.
5. Enter the four-digit lock code.
The lock code is the last 4 digits
of your mobile phone number
if it is set. The lock code is the
last 4 digits of your MEID if
your mobile phone number is
not set.
7.7.1 Edit Codes
Allows you to enter a new four-digit
lock code.
1. Open the flip and press
[MENU].
2. Press
Settings & Tools.
3. Press
Phone Settings.
4. Press
Security.
5. Enter the four-digit lock code.
6. Press
Edit Codes.
7. Select Phone Only or Calls &
Services.
8. Enter your new four-digit lock
code.