AUTO SYNC
When using Mixing, you can synchronize the tempo
of audio les being played in USB 1 and USB 2 by
pressing AUTO SYNC.
To stop it, press AUTO SYNC twice.
y
The tempo of music being played in USB 1 is
synchronized to that in USB 2.
y
TEMPO A doesn’t work when AUTO SYNC is
on.
y
If function is changed, AUTO SYNC function is
cancelled.
y
In case of below, AUTO SYNC error may occur
depending on the sound source.
- The silent section in the beginning of the track.
- Intro or bridge section in which few musical
instruments appear.
- In cases where playback speed or tempo of the
song changes.
- In case that the data for BPM is provided in real
time, not the beginning of the song.
y
If the song is being played too fast or slow,
press and hold AUTO SYNC.
‘AUTO SYNC/RE-ANALYZING’ is displayed.
y
AUTO SYNC is available only when USB 1 is
selected for SIDE A/1 and USB 2 is selected
for SIDE B/2 in MIXER ON mode and both are
being played.
,
Note
To Next Page
Loading...
