What to do if radio stations cannot be tuned in on LG Receiver?
If you're unable to tune into radio stations on your LG Receiver, here are some things to try: * Connect the antenna securely. * If tuning in with automatic tuning, try tuning in the station manually if the signal strength is too weak. * If tuning by scanning preset stations, preset the stations.
Why is my LG SH52PH-S Receiver remote control not working?
If the remote control for your LG Receiver isn't working correctly, consider these potential causes: * Ensure the remote control is pointed at the remote sensor on the receiver. * Make sure you are within 23 ft (7 m) of the receiver. * Remove any obstacles blocking the path between the remote and the receiver. * Replace the batteries in the remote control with new ones.
Why is there no sound coming from my LG Receiver?
If you are experiencing a lack of sound or very low sound from your LG Receiver, consider the following: * Ensure the equipment connected with the audio cable is set to receive DVD audio signal output. * Check that the audio cables are securely connected. * Verify that the equipment connected with the audio cable is powered on. * If the audio connecting cable is damaged, replace it.
What to do if the LG SH52PH-S Receiver remote control does not work properly?
If the remote control isn't working, make sure you're pointing it directly at the receiver's remote sensor from a distance of no more than 23 ft (7 m). Remove any obstacles that might be blocking the signal. If it still doesn't work, try replacing the batteries with new ones.
How to fix loud hum or noise heard from LG SH52PH-S Receiver?
Ensure the disc is clean. Check that the speakers and components are securely connected. Also, move the TV away from the audio components to reduce interference.
What to do if LG SH52PH-S Receiver remote control is not working?
If the remote control for your LG DVD/CD Receiver isn't working correctly, consider the following: * Ensure the remote is pointed directly at the receiver's remote sensor. * Make sure you are within 23 ft (7 m) of the receiver. * Remove any obstacles between the remote and the receiver. * Replace the remote's batteries with new ones.
How to fix no power on my LG SH52PH-S?
If your LG Receiver has no power, ensure the power cord is securely plugged into the wall outlet. A loose connection is often the cause.
How to troubleshoot no picture on LG SH52PH-S Receiver?
If there is no picture from your LG DVD/CD Receiver, make sure of the following: * The TV is set to receive DVD signal output. Select the appropriate video input mode on the TV. * The video cable is securely connected into the jacks. * The connected TV is turned on.
Why is the playback picture quality poor on my LG SH52PH-S Receiver?
If the playback picture quality on your LG Receiver is poor, consider these possibilities: * Clean the disc. * Insert a disc. Ensure that the DVD or audio CD indicator in the DVD display is lit. * Insert a playable disc, checking the disc type, color system, and regional code. * Place the disc with the playback side down. * Ensure the disc is placed correctly within the guide on the disc tray. * Press the SETUP button to turn off the menu screen, if it's on. * Cancel the Rating function or change the rating level, if it is set.
What to do if there is no picture on my LG SH52PH-S Receiver?
If you're not getting a picture from your LG Receiver, here are a few things to check: * Make sure the TV is set to the correct video input mode to receive the DVD signal output. * Ensure the video cable is securely connected to the jacks. * Verify that the connected TV is turned on.
General| Channels | 5.1 |
|---|---|
| HDMI Outputs | 1 |
| Bluetooth | Yes |
| Input Sensitivity | 200 mV |
| Wireless Rear Speakers | No |
| Type | Receiver |
| USB Port | 1 |
| Response Bandwidth | 20Hz-20kHz |
| Input Impedance | 47 kOhm |
| Tuner Bands | FM |
| Width | 430mm |
| Depth | 320mm |
| Height | 170mm |
| Optical Input | 1 |
To Next Page
