To Next PageTo Next PageWhy is there no sound from my LG Receiver?
If your LG Receiver has no sound or very low sound, make sure the equipment connected with the audio cable is set to receive the DVD audio signal output. Check that the audio cables are securely connected and that the connected equipment is powered on. If the issue persists, try replacing the audio connecting cable, as it may be damaged.
What to do if there is no picture on my LG SH52TH-C Receiver?
If your LG Receiver isn't displaying a picture, ensure your TV is set to the correct video input mode to receive the DVD signal. Also, check that the video cable is securely connected. Finally, make sure the TV is powered on.
How to troubleshoot LG SH52TH-C remote control not working?
If the remote control isn't working properly with your LG Receiver, try these steps: * Point the remote directly at the remote sensor on the DVD/CD Receiver. * Ensure you're using the remote within a range of about 23 ft (7 m). * Remove any obstacles between the remote and the DVD/CD Receiver. * Replace the batteries in the remote with new ones.
What to do if LG SH52TH-C Receiver remote control is not working?
If the remote control for your LG DVD/CD Receiver isn't working correctly, consider the following: * Ensure the remote is pointed directly at the receiver's remote sensor. * Make sure you are within 23 ft (7 m) of the receiver. * Remove any obstacles between the remote and the receiver. * Replace the remote's batteries with new ones.
Why is there loud hum or noise heard from LG SH52TH-C Receiver?
If you're hearing a loud hum or noise from your LG Receiver, try the following: * Clean the disc. * Ensure the speakers and components are securely connected. * Move the TV away from the audio components.
What to do if there is no sound from my LG SH52TH-C?
If you're experiencing no sound or very low sound from your LG DVD/CD Receiver, make sure the connected equipment is set to receive DVD audio signal output by selecting the correct input mode on the receiver. Also, ensure the audio cables are securely connected and the connected equipment is turned on. If the issue persists, the audio connecting cable might be damaged and need replacement.
Why is my LG Receiver remote control not working properly?
If your LG Receiver's remote control isn't working, ensure you're pointing it directly at the receiver's remote sensor and are within 23 ft (7 m). Remove any obstacles between the remote and the receiver. If it still fails, replace the batteries with new ones.
How to fix LG SH52TH-C remote control not working?
If your LG Receiver remote control isn't working correctly, here are some things to check: * Make sure you're pointing the remote control directly at the remote sensor on the DVD/CD Receiver. * Ensure you're using the remote control within a reasonable distance, about 23 ft (7 m). * Remove any obstacles that might be blocking the path between the remote and the receiver. * Try replacing the batteries in the remote control with new ones.
How to fix LG SH52TH-C Receiver remote control that is not working?
If the remote control for your LG Receiver isn't working, make sure you're pointing it directly at the receiver's remote sensor. Ensure you are within 23 ft (7 m) of the receiver and that there are no obstacles in the way. If it still doesn't work, replace the batteries with new ones.
Covers risks of electric shock and advises against opening the unit.
Addresses safe handling of the power cord and laser system precautions.
Details the controls, indicators, and ports located on the front panel of the receiver.
Explains the various input and output connectors found on the rear panel.
Explains the function of each button on the remote control for system operation.
Details the effective operating range and battery installation for the remote.
Instructions for connecting the receiver to a TV using a standard video cable.
Steps for connecting the receiver to a TV using component video (Y PB PR) cables.
Details connections for external audio devices via Optical, Audio In, and AUX inputs.
Instructions for connecting USB devices and setting up the FM/AM antennas.
Guide to connecting the receiver to an HDMI-compatible TV or monitor.
Explains how to adjust video resolution settings for HDMI output.
Instructions for connecting the wireless transmitter, receiver, and speakers.
Guide to attaching ferrite cores to speaker cables for noise reduction.
Details the LED indicators for the wireless transmitter and receiver.
Steps for assembling speakers and connecting them to the system.
Procedure for setting or re-setting the wireless transmitter and receiver ID.
Diagnoses and resolves issues where wireless rear speakers are not producing sound.
How to display and cycle through various playback details like track, time, audio, and subtitle.
Explains how to access, navigate, and exit the system's setup menu.
Configures display language, OSD language, and audio/subtitle preferences.
Sets the display aspect ratio (4:3 or 16:9) for the connected TV.
Adjusts display modes like Letterbox and Panscan when TV Aspect is set to 4:3.
Configures audio settings like Dynamic Range Control, Vocal, and HD AV Sync.
Guides speaker configuration, volume, distance adjustment, and test signals.
Blocks playback of rated DVDs based on content ratings and age.
Set or change the parental control password and configure the area code.
Configures PBC for VCDs and obtains DivX VOD registration code.
Enables score display and fanfare sound for karaoke playback.
Controls for opening/closing the disc tray and managing playback (pause, skip, repeat, zoom).
Operations for navigating menus, scanning, selecting audio/subtitle languages, and slow playback.
Enables faster playback and searching for specific playback times on discs.
Allows marking and recalling specific points in a disc for quick access.
Manages screen saver activation and memorizes the last playback scene.
Sets TV system (PAL/NTSC) and explains how to control LG TV functions with the remote.
Details compatibility requirements for MP3/WMA files and ID3 Tag display.
Instructions for playing audio files and navigating menus, including tips.
Store favorite tracks from discs into memory for custom playback sequences.
Learn how to erase individual tracks or the entire programmed list.
Details JPEG disc compatibility, playback procedures, and resolution notes.
Covers slide show, still picture mode, image rotation, and file navigation.
Covers DivX disc compatibility, resolution, and file name limitations.
Lists supported DivX video, subtitle, codec, and audio file formats.
Procedure to preset up to 50 FM/AM stations and clear stored stations.
Instructions for manual tuning, selecting preset stations, and using the radio tuner.
Tips for optimizing radio signal strength and reducing noise.
Controls for setting automatic power-off, display brightness, and muting audio.
Selects audio input sources and adjusts advanced sound modes like XTS and Virtual Sound.
Applies various pre-programmed sound fields for different listening experiences.
Provides a list of codes for selecting desired languages for audio, subtitle, and menu.
Lists area codes used for DVD rating standards, essential for regional playback.
Resolves issues related to power, unit non-responsiveness, and disc insertion.
Addresses problems with display, video quality, and audio output.
Solutions for playback failures, disc errors, and audio hum or noise.
Resolves problems with tuning in radio stations and antenna connection.
Addresses malfunctions with the remote control and dim front panel display.
General