Connecting32
Connecting
2
8. On your iOS device, go to iOS setting -> Wi-Fi
setting and select “MusicFlow_Setup” to connect.
y
If “MusicFlow_Setup” is not on the list, scan
for available Wi-Fi networks again.
y
When your smart device is connected to
“MusicFlow_Setup”, you cannot use the
internet.
,
Note
9. If you have a password for your network, the
security screen appears on your smart device.
Enter your password.
10. Then select [Next] on the screen.
11. Then select [Next] on the screen.
12. Select [Complete] to complete the connection.
If the speaker fails to connect to your network
or its network connection operates abnormally,
place the speaker closer to your router and try
again.
,
Note
To Next Page
Loading...
