Connecting 39
Connecting
2
6. Select [Finish] to complete the connection.
7. Connect the speaker to Music Flow R1. Refer
to the “Connecting the speakers to your Home
Network (Additional)” on page 34.
Use as a wireless extender
When you want to expand MUSICow mesh
network coverage, add the Bridge (R1) to your home
network.
a
b
Bridge
If you want to use this connection, Initial MUSICow
product is connected to your home router with LAN
cable.
1. Attach the power cord to the power port on the
rear of the Bridge (R1) and then plug the power
cord into an electrical outlet.
2. The power LED on the front of Bridge (R1) turns
on. On your smart device, select the Music Flow
Player app. Tap the [Home] menu.
To Next Page
Loading...
