Auto function change
This unit recognizes input signals such as Optical,
Bluetooth, LG TV and Portable and then changes to
the suitable function automatically.
When an Optical signal comes in
When you turn on the external device connected to
this unit by an optical cable, this unit changes the
function to optical. You can hear the sound from your
device.
When you try to connect a Bluetooth
device
When you try to connect your Bluetooth device to
this unit, Bluetooth function is selected. Play your
music on the Bluetooth device.
When an LG TV signal comes in
When you turn on your LG TV connected by LG
Sound Sync (Wireless connection), this unit changes
the function to LG TV. You can hear the sound from
your TV.
When a Portable device is connected
When you connect your portable device using a
portable cable, this unit changes the function to
Portable. You can hear the music from your device.
y
To change to optical function, it needs at least
5 seconds of no signal.
y
This unit does not change the function to
Optical if SIMPLINK of the connected TV, Blu-
ray disc player, set-top box or etc. device is set
to on or connected CEC supported device is
turned on.
y
If you want to use the auto function change,
trun off SIMPLINK function on your LG TV.
It takes for about 30 seconds to turn off
SIMPLINK.
y
If the Bluetooth connection lock function is
set, the Bluetooth connection will only be
available on Bluetooth and LG TV function.
(Refer to the page 31.)
,
Note
To Next Page
Loading...
Need help?
General
Weight and Dimensions
