3. When this unit is successfully connected with
your Bluetooth device,
"PAIRED" Your device's name "BT" appears in
the display window in this order.
y
If it is unavailable to display the device's name
on the unit, "_" will be displayed.
y
To check the connected device's name,
press and hold REPEAT on the remote. The
connected Bluetooth device is displayed.
,
Note
4. Listen to music.
To play a music file stored on your Bluetooth
device, refer to your Bluetooth device’s user
guide.
y
When using Bluetooth technology, you have
to make a connection between the unit and
the Bluetooth device as close as possible and
keep the distance short.
However it may not work well in the cases
below :
- If there is a obstacle between the unit and
the Bluetooth device.
- If there is a device using the same
frequency as the Bluetooth technology
such as medical equipment, a microwave
or a wireless LAN device.
y
You should connect your Bluetooth device to
this unit again when you restart it.
y
The sound may be interrupted when the
connection has interference by other
electronic waves.
y
Pairing is limited to one Bluetooth device per
unit and multi-pairing is not supported.
y
Depending on the type of the device, you may
not be able to use the Bluetooth function.
y
You can enjoy Bluetooth function using
smart phone, MP3, Notebook, etc..
y
The more distance between the unit and the
Bluetooth device, the lower the sound quality
becomes.
,
Note
y
Bluetooth connection will be disconnected
when the unit is turned off or the Bluetooth
device gets far from the unit.
y
When the Bluetooth connection is
disconnected, connect the Bluetooth device
to the unit again.
y
When the unit is not connected, “READY”
appears in the display window.
y
When you connect a Bluetooth device
(iOS device etc.) to this unit or operate the
device, the volume level can be synchronized
between the two devices.
y
You can control a Bluetooth device using
C/V
(Skip) and
dM
(Play/Pause)
buttons on the remote control.
y
If you change to another function after
connecting Bluetooth, Bluetooth connection
will be disconnected. When you return to
Bluetooth function, Bluetooth connection
will be connected automatically.
,
Note
BLUETOOTH connection lock
(BT Lock)
You can limit Bluetooth connections to only
BT (Bluetooth) and LG TV function to prevent
unintended Bluetooth connections.
To turn on this function, press and hold AUTO
POWER on the remote control for about 2 seconds
in BT (Bluetooth) function and press it once again
while “OFF - BT LOCK” is scrolled. Then you can limit
Bluetooth connections.
To turn off this function, press and hold AUTO
POWER on the remote control for about 2 seconds
in BT (Bluetooth) function and press it once again
while “ON - BT LOCK” is scrolled.
Even if you set up Bluetooth connection lock
to On, this sound bar turns on by Auto Power
function. Turn off Auto Power function to
prevent it.
,
Note
To Next Page
Loading...
Need help?
General
Weight and Dimensions
