1-13
Copyright © 2018 LG Electronics Inc. All rights reserved.
Only for training and service purposes.
3) Connect PC and SET by cross LAN cable.
PC IP setting
IP: 192.168.0.1
Subnet: 255.255.254.0
Gateway: 10.168.0.1
4) Set power on.
5) Connect LAN cable to Set and then Press “ADD” key within 3 seconds after connect the LAN.
(Please connect the LAN when blinking WiFi-LED after booting)
*Download fi le name
B/E : LG_NB_C003M06.ROM
MICOM : MICOM_SJ9.HEX
※ Caution : Do not you update the B/E program and MICOM program at the same time.
6) Connect Status change “OK!” if success connect MP tool.
Using MP tool
To Next Page
Loading...
