1-8
Copyright © 2018 LG Electronics Inc. All rights reserved.
Only for training and service purposes.
1. Using USB
1-1. Preparation
- Remote control.
- Do format USB Memory to FAT32 File system.
- USB : Update fi le exist only in the USB Memory stick.
Ex ) SJ9 :
MAIN E:\DSP_SJ9.HEX (if USB driver is E:\)
MICOM E:\MICOM_SJ9.HEX (if USB driver is E:\)
B/E E:\LG_NB_C003M06.ROM (if USB driver is E:\)
MEQ E:\MEQ_SJ9.BIN (if USB driver is E:\)
PEQ E:\EQ_PRG_SJ9.BIN (if USB driver is E:\)
HDMI E:\HDMI_SJ9.BIN (if USB driver is E:\)
WIRELESS(TX) E:\WIRELESS_TX.bin (if USB driver is E:\)
WIRELESS(RX) E:\WIRELESS_RX.bin (if USB driver is E:\)
1-2. Update
1) Power on.
2) Insert USB.
- When connecting USB to the main unit, you can connect easily using USB Gender.
3) When display “UPDATE” on LCD, press play/pause key on remote control and proceed update.
4) Never remove USB or AC cord while updating.
5) During the update, LCD is displayed as like below.
DSP MICOM B/E HDMI
EQ WIRELESS(TX) WIRELESS(RX)
6) After update fi nish, power will be off automatically.
SOFTWARE UPDATE GUIDE
USB Gender
D-UPDATE
EQUPDATE
M-UPDATE
WRITE 00
B-UPDATE
SEND 00
H-UPDATE
※ USB Gender P/NO : EAD62440501
To Next Page
Loading...
Need help?
General
