34
EN
Replace and Clean the
Micro Dust Filter
Clean the micro dust filter once a month, or more,
if necessary.
Disassemble and Clean the Micro
Dust Filter
If you look at the indoor unit from above it, can
assemble the top filter easily.
1
Turn off the power to the unit.
2
Hold the ionizer, lift it up slightly. And then,
hold the knobs of the micro dust filter, lift it up
slightly.
3
Remove it from the indoor unit.
4
Clean the filter with a vacuum cleaner or
brush. (Do not wash the micro dust filter with
water.)
Assemble the Micro Dust Filter
1
Turn off the power to the unit.
2
Hold the ionizer, lift it up slightly. And then
insert the hooks of the micro dust filter into the
front cover.
3
Push down hooks to assemble the micro dust
filter.
4
Check the side of the front cover for correct
assembly of the micro dust filter.
NOTE
• The micro dust filter can be broken when it is
bent.
• When the micro dust filter is not assembled
correctly, dust and other substances can enter
into the indoor unit.
• If dust is caught in the filter, cooling
performance is degraded, wind sound gets
rough, and the electricity bill increases, so
clean the micro dust filter once a month and
replace it once every 6 months.
35 / 206
To Next Page
Loading...
Need help?
General
