21
PROGRAMMING MODE
3. How to enter the
Structure of Content of
Entering set up
mode.
You will see LqC1
Button Display
Press the High Temp. button.
Press the Med Temp. or the Low Temp. button until
appears in the display.
Press the Start button.
Press the Med Temp. or the Low Temp. button until
appears in the display.
• Special price days apply or not
• Non-stop wash apply or not (only for washer)
•
Add super wash apply or not (only for washer)
• Select vend type
• Sense dry apply or not (only for washer)
• Pre-wash apply or not (only for washer)
• Top off apply or not (only for dryer)
• Disable
• Disable
• Enable
MFL67863709_en_170328.indd 21 2017-03-28 �� 9:54:26