LG TCD1870CGS User Manual

40
PROGRAMMING MODE
17. Thermistor control temperature set up
Entering set up
mode.
You will see LqC1
Button Display
Press the High Temp. button.
Press the Med Temp. or Low Temp. button until appears in the
display.
Press the Start button.
Press the Med Temp. or the Low Temp. button until
appears in the display.
Press the Start button.
Press the Start button.
Display previous value.
Press Med Temp.(+) or Low Temp.(-) button to select
time between 38 ~ 62.
Press the Start button.
The machine sets up the thermistor control temperature.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready mode.
• Coin type - Turn on/o toggle switch
• Card type - Pull the service card
• OPL/Coin type – Press “High Temp.” twice
Structure of Content of
• Regular hot (High Temp.)
thermistor control temperature set up
• Regular warm (Med Temp.)
thermistor control temperature set up
• Regular cold (Low Temp.)
thermistor control temperature set up
MFL67863709_en_170328.indd 40 2017-03-28 �� 9:54:37

LG TCD1870CGS Specifications

General

Brand	LG
Model	TCD1870CGS
Category	Dryer
Language	English