22
ENGLISH
NOTE
• Install the monitor at least 100 mm away from the wall on each side of the monitor to ensure sufficient
ventilation.
• The wall mount bracket and the wall mount bracket screws are not included.
CAUTION
• Be sure to attach the VESA design cover before attaching the wall mount bracket.
• If you use screws longer than the standard length, it may damage the inside of the product.
• To prevent injury, this apparatus must be securely attached to the wall in accordance with the installation
instructions.
Wall Mount (mm) 100 x 100
Standard screw M4 x L10
Number of screws 4
Wall Mount Plate (Optional) RW120
NOTE
• Vertical orientation is not recommended.
To Next Page
Loading...
