To Next PageTo Next PageWhat to do if there is no sound from LG UltraGear 32GN500-B.AUS Monitor headphone port?
If there's no sound from the headphone port on your LG monitor, first ensure that the headphone connections are properly made. Then, try increasing the volume using the joystick. Lastly, set the audio output of your PC to the monitor you are using by going to Control Panel > Hardware and Sound > Sound and setting the Monitor as the default device.
How to troubleshoot no sound from the headphone port on an LG UltraGear 32GN500-B.AUS?
If you are not getting any sound from the headphone port on your LG Monitor, ensure that the headphone connections are properly made. If the connections are correct, try increasing the volume using the joystick. Also, verify that the audio output of your PC is set to the monitor. In Microsoft Windows, this can be adjusted via Control Panel > Hardware and Sound > Sound, where you should set the Monitor as the default device.
How to fix LG UltraGear 32GN500-B.AUS when nothing is displayed on the screen?
If nothing appears on your LG Monitor screen, first, ensure the power cord is properly connected to the power outlet. Then, verify the power cable connection and press the power button. Also, check if the connected input is enabled via Menu > Input. If the monitor is in sleep mode, try moving the mouse or pressing a key on the keyboard. Finally, make sure your computer is turned on. If the issue persists, verify that the signal cable between the PC and the monitor is securely connected. If it's still not working, install the display driver from the LG website and ensure your graphics card supports Plug and Play.
What to do if there is no sound from the headphone port on my LG UltraGear 32GN500-B.AUS?
If you are getting no sound from the headphone port on your LG Monitor, first, ensure that the headphone port connections are properly made. If that doesn't work, try increasing the volume using the joystick. Finally, set the audio output of your PC to the monitor by going to Control Panel > Hardware and Sound > Sound and setting the Monitor as the default device.
Why is my LG Monitor screen unstable and shaky?
If the screen display on your LG Monitor is unstable and shaky, or if images leave shadow trails, and the resolution is set to HDMI 1080i 60/50 Hz (interlaced), the screen may be flickering. Change the resolution to 1080p or the recommended resolution to resolve this issue.
What to do if nothing is displayed on my LG UltraGear 32GN500-B.AUS Monitor screen?
If nothing is displayed on your LG Monitor screen, first ensure the power cord is correctly plugged into the power outlet. Then, check the power cable connection and press the power button. Also, verify that the connected input is enabled in the monitor's settings (Settings > Input). If the monitor is in sleep mode, move the mouse or press any key on the keyboard. Confirm that your computer is turned on. If the issue persists, check the signal cable between the PC and the monitor to ensure it is properly connected. Finally, install the display driver from the LG website and verify that your graphics card supports Plug and Play.
Why are some features disabled on my LG Monitor?
If some features on your LG Monitor are disabled, the OSD might be locked. To unlock it, go to Menu > General and set OSD Lock to Off.
What to do if LG UltraGear 32GN500-B.AUS screen display is unstable and shaky?
If the screen display of your LG Monitor is unstable and shaky, or if images displayed leave shadow trails, and the resolution is set to HDMI 1080i 60/50 Hz (interlaced), the screen may be flickering. Try changing the resolution to 1080p or the recommended resolution.
What to do if nothing is displayed on LG UltraGear 32GN500-B.AUS screen?
If nothing is displayed on your LG Monitor screen, verify that the power cord is correctly plugged into the outlet. Check the power cable connection and ensure the power button is pressed. Also, confirm the connected input is enabled via Menu > Input. If the monitor is in sleep mode, move the mouse or press a key. Ensure your computer is turned on. If the issue persists, check the signal cable between the PC and the monitor and reconnect it if necessary. Finally, install the display driver from the LG website and ensure your graphics card supports Plug and Play.
Why is the screen display unstable and shaky on my LG UltraGear 32GN500-B.AUS?
If the screen display on your LG Monitor is unstable or shaky, or if images leave shadow trails, and the resolution is set to HDMI 1080i 60/50 Hz (interlaced), this could be the cause. Try changing the resolution to 1080p or the recommended resolution.
General| Screen Size | 32 inches |
|---|---|
| Refresh Rate | 165Hz |
| Panel Type | VA |
| Brightness | 300 cd/m² |
| Contrast Ratio | 3000:1 |
| HDR | HDR10 |
| Aspect Ratio | 16:9 |
| Adaptive Sync | AMD FreeSync Premium |
| VESA Mount | 100 x 100 mm |
| Resolution | 2560 x 1440 |
| Response Time | 1ms |
| Ports | 2 x HDMI, 1 x DisplayPort |
| Viewing Angle | 178° |
