LG ut36 - Function Setting - Change Temp

OPERATING INSTRUCTIONS
23
ENGLISH
Repeat pressing button until
icon flash.
1
Press button to change.
❈ Converting temp value : 1~7
2
Press button to complete
and active the setting process.
3
Press button to exit or
system will automatically release
without any input after 25
seconds.
❈ When exiting without pressing
set button, the manipulated
value is not reflected.
4
Function Setting - Change Temp
Change temperature is the function to setup air-cooling and heating drive automatically changeable ac-
cording to the temperature at artificial intelligence drive mode.
1,MFL67870326,영영 17. 7. 18. 영영 3:27 Page 23