20 OPERATION
Remote Start
Remotely starts or stops the preheating function
of the appliance. The appliance must be connected
to a home Wi-Fi network to use Remote Start.
Setting Remote Start
1 Press Remote Start. The Wi-Fi icon f
appears in the display.
• In this mode, the controls for both ovens
are locked.
2 Follow the instructions in the LG ThinQ
application for using the Remote Start.
• Remote Start is disconnected in the following
situations:
- Remote Start is never set up in the
smartphone app.
- The Remote Start status is “ready”.
- Remote Start experiences a problem during
operation.
• The Wi-Fi icon on the display shows the status of
the appliance's network connection. If the Wi-Fi
icon is not lit, use the smartphone app to select
the Wi-Fi network or register the product again.
• A faulty Wi-Fi connection could delay the Remote
Start function.
• Disconnect the probe if attached.
To Next Page
Loading...
Need help?
General