44 OPERATION
3 Press the numbers to set the time settings.
4 Press START. The remaining proofing time
appears in the display.
• If the proofing time is not set, the oven
automatically turns off after 12 hours.
Canceling the Proof Function
Press Lower CLEAR / OFF.
• To avoid lowering the oven temperature and
lengthening proofing time, do not open the oven
door unnecessarily. Check bread products early
to avoid over proofing.
• Do not use the Proofing mode for warming food
or keeping food hot. The proofing oven
temperature is not hot enough to keep foods at
safe temperatures. Use the Warm feature to
keep food warm. Proofing does not operate
when the oven is above 125 ℉. OVEN IS HOT
shows in the display.
• It is normal for the fan to operate during the
Proof function.
• The proof feature automatically provides the
optimum temperature for the proofing process,
and therefore does not have a temperature
adjustment.
• For best results, cover the dough with a cloth or
with plastic wrap. (The plastic may need to be
anchored underneath the container so the oven
fan does not blow it off.)
More Modes (Favorite)
For frequently used cooking menus, you can
combine up to three different temperatures and
cooking modes into one hot key.
Creating a Favorite
• When combining two or more cooking modes, a
cooking time or probe temperature must be set
before selecting an additional cooking mode.
• The Probe function cannot be used with the
Broil, Sous Vide, Steam Maintenance, Warm, or
Proof modes.
1 Press More Modes.
2 Press 4.
3 Press More Modes repeatedly to select the
desired recipe.
4 Press the numbers to enter the desired
temperature.
• Only the selected temperature is stored, not
the cooking time.
• If the oven temperature is changed, the
changed temperature is stored.
5 If desired, press Cook Time to set the cook
time. Press the numbers to set the time
settings.
6 Press START. Once the oven reaches the
desired temperature, PAEHEAυιξη appears in
the display.
• If the probe was inserted in the oven jack to add
a probe temperature, remember to remove it.
• After the steam mode is used for 8 hours, a
reminder to descale the product appears in the
display the next time the steam mode is
selected. You will not be able to use the steam
mode until the Descaling function is run. To
avoid this delay, run the Descaling function after
every 2-3 uses of the steam mode.
• If the descaling reminder appears, press OK to
run the Descaling function.
• Proofing doesn't operate when the oven is above
125 ℉ (52 ℃).
• If using Proof after cooking, wait for the oven to
cool first.
• The Proof mode can only be set as a single stage,
not as part of multi-stage cooking.
Recipe
Default
Temp. (℉)
(may be
changed and
recalled)
Cooking
Mode
1. Bread 375 Bake
2. Meat 325 Conv.Roast
3. Chicken 350 Conv.Roast
To Next Page
Loading...
Need help?
General