Need help?Do you have a question about the LG WD-1409RD and is the answer not in the manual?
Describes the key features of the washing machine.
Explains how fuzzy logic determines washing time based on inputs.
Details the water level control mechanism using a pressure sensor.
Explains conditions under which the washing machine door cannot be opened.
Lists included accessories for the washing machine.
Guides through the process of testing the washing machine's operation.
How to select washing cycles using the cycle selector knob.
Describes various additional programs like Time Delay and Favorite.
Explains how to use the power button to turn the washing machine on/off.
How to use the Start/Pause button to start or stop the washer.
Details the functions of the Option button for various cycle adjustments.
How to select dry programs using the dry selector knob.
Explains how to set and use the Tub Clean special cycle.
How to change spin speed and select water temperature.
How to set the beep sound on or off by holding Option and Spin buttons.
How to prevent unwanted use by locking and unlocking the control panel.
Provides a visual layout of the main PCB with component identification.
Shows the layout of the power PCB with component identification.
Displays the cycle program chart with wash, rinse, spin, and dry times.
Steps to take before performing service on the washing machine.
Instructions on how to enter and use the load test mode for diagnostics.
Method to check the water level frequency using button combinations.
Procedure to check thermistor temperatures during operation.
Lists error codes, symptoms, and causes for washing machine malfunctions.
Detailed troubleshooting steps for specific error codes.
Troubleshooting steps for the Water Inlet Error (IE).
Troubleshooting steps for the Unbalanced Error (UE).
Troubleshooting steps for the Water Outlet Error (OE).
Troubleshooting steps for the Overflow Error (FE).
Troubleshooting steps for the Pressure Sensor S/W Error (PE).
Troubleshooting steps for the Door Open Error (dE).
Troubleshooting steps for the Thermistor (Heating) Error (tE).
Troubleshooting steps for the Motor Locked Error (LE).
Detailed steps for disassembling and assembling the Hall sensor.
Troubleshooting steps for the Dry Heater Error (dHE).
Troubleshooting procedures for issues related to the Dry Heater.
Troubleshooting procedures for issues related to the Dry Fan Motor.
Troubleshooting steps for when the washing machine has no power.
How to troubleshoot vibration and noise issues during the spin cycle.
Troubleshooting steps for when detergent or softener is not dispensed correctly.
Troubleshooting steps for water leaks originating from the dispenser tray.
Troubleshooting steps for water leaks from the dispenser seal or door.
Troubleshooting steps for general water leaks on the floor.
Steps for disassembling the control panel assembly.
Instructions for disassembling the main PCB assembly.
Instructions for disassembling the power PCB assembly.
Steps to disassemble the dispenser assembly.
Steps for disconnecting and removing the inlet valve.
Procedure for removing the washing machine door.
Steps for disassembling the cabinet cover.
Steps for removing the door lock switch assembly.
Instructions for removing the rotor, stator, and friction damper.
Steps for removing the pump assembly.
Instructions for removing the washing heater.
How to remove foreign objects stuck between the drum and tub.
Steps for disconnecting and removing the safety switch assembly.
Lists parts for the cabinet assembly with reference numbers.
Exploded view of the control panel and dispenser assembly.
Exploded view of the drum and tub assembly.
Exploded view of the dryer components.
To Next Page
General
