• Do not exceed the maximum fill line.
Overfilling can cause early dispensing
of the fabric softener which could stain
clothes.
• Do not leave the fabric softener in the
detergent drawer for more than 2 days.
(Fabric softener could harden)
• Softener will automatically be added
during the last rinse cycle.
• The soap drawer can be partially
opened to add pre dissolved soap
powder during the initial fill.
• Solvents(benzene, etc) are not
allowable.
• The detergent should be used according to the
instruction of the detergent manufacture.
• If too much detergent is used, too many suds
can occur and this will decrease the washing
result or cause heavy load to the motor.
(Causing malfunctions)
• If there are too many suds, the detergent
quantity must be reduced.
• Use specified Front loader washing powder
only.
• Detergent usage may need to be adjusted
for water temperature, water hardness,
size and soil level of the load. For best
results, avoid oversudsing.
❋
Tips
Full load : according to
manufacturer’s recommendation.
Part load : 3/4 of the normal amount.
Minimum load : 1/2 of full load.
• Detergent is flushed from the dispenser at
the beginning of the cycle.
3. Detergent dosage
To Next Page
Loading...
