Why my LG Washer does not start?
If your LG Washer isn't starting, ensure the electrical power cord is securely plugged into the wall outlet. Also, check your house fuse or circuit breaker and reset it if necessary. Finally, verify that the water supply tap is turned on.
How to fix water leaks in LG WD1408NCW?
If your LG Washer is leaking water, check and tighten the supply hoses and drain hose connections at both the tap and the washing machine. If the issue persists, the house drain pipes may be clogged, in which case you should unclog them or contact a plumber if needed.
What to do if water does not enter my LG Washer?
If water isn't entering your LG Washer or is entering slowly, first check another tap in the house to ensure the water supply is adequate. Then, fully open the water supply tap and straighten any kinks in the water supply hose(s). Lastly, inspect the filter of the supply hose(s) for clogs.
Why water in my LG WD1408NCW Washer does not drain?
If water in your LG Washer isn't draining or is draining slowly, start by cleaning and straightening the drain hose to ensure it's not kinked or clogged. If the problem persists, clean the drain filter.
How to fix LG WD1408NCW Washer that will not spin?
If your LG Washer won't spin, make sure the door is firmly shut. Press the Start/Pause button; it may take a few moments to begin spinning. The door must be locked. Add 1 or 2 similar items to help balance the load. Rearrange the load to allow proper spinning.
What to do if the door of my LG WD1408NCW Washer does not open?
If the door of your LG Washer doesn't open, check if the ‘Door Lock’ icon is illuminated. Once the washing machine has started, the door cannot be opened for safety reasons. You can safely open the door after the ‘Door Lock’ icon turns off.
How to prevent fabric softener overflow in LG WD1408NCW Washer?
If there is a fabric softener overflow in your LG Washer, too much softener may be the cause. Follow softener guidelines to ensure the appropriate amount is used and do not exceed the maximum fill line.
How to unfreeze supply/drain hose or drain pump in LG WD1408NCW?
Supply warm water into the drum and unfreeze drain hose and drain pump. Wet a towel in warm water and apply to supply hose.
Why is my LG WD1408NCW making vibrating noise?
If your LG Washer is making vibrating noise, make sure the transit bolts were removed during installation (refer to the Installation guide). Ensure all the feet are resting firmly on the ground, that the washing machine is level, and tighten the lock nuts up towards the base of the appliance. Please contact the customer information center if you have ever laid down the appliance when moving or installing it.
How to stop rattling noise in my LG Washer?
If your LG Washer is making rattling and clanking noises, check all pockets to ensure they are empty. Foreign objects such as coins or safety pins may be in the drum or pump. Close zippers, hooks, and drawstrings to prevent these items from snagging or tangling on other clothes; items like clips, matches, pens, coins, and keys can damage both your washer and your clothes.
Essential safety guidelines to prevent risks and damage from unsafe operation.
Guidelines for choosing a suitable location for the appliance.
Requirements for safely connecting the appliance to the power supply.
Steps to remove shipping restraints before operation.
Procedures for ensuring the appliance is stable and level.
Instructions for attaching the water inlet hose.
Detailed steps for connecting the water hose to different tap types.
How to connect the water hoses to the back of the washing machine.
Guidelines for correctly positioning the water drain hose.
Step-by-step guide to starting a wash cycle.
Guidance on using detergents and softeners.
Specific instructions for adding detergent and softener.
Explanation of buttons, display, and functions on the control panel.
Table listing symptoms, reasons, and solutions for common issues.
Lists error codes, their reasons, and corresponding solutions.
General| Type | Front Load |
|---|---|
| Capacity | 8 kg |
| Spin Speed | 1400 RPM |
| Energy Rating | A+++ |
| Dimensions (H x W x D) | 850 x 600 x 550 mm |
| Color | White |
| Programs | 14 |
| Inverter Motor | Yes |
| Smart Diagnosis | Yes |
| Child Lock | Yes |
| Delay Start | Yes |
To Next Page
