To Next PageTo Next PageWhat to do if my LG Washing machine won't start?
First, ensure the electrical power cord is properly plugged into the wall outlet. Check your house fuse or circuit breaker and reset if necessary. Make sure the water supply tap is turned on and that the door is firmly shut. Press the Start/Pause button to begin the cycle. If the washer still doesn’t start, it may take a few moments to begin spinning after pressing the Start/Pause button.
What to do if my LG Washing machine is leaking water?
If your LG Washing machine is leaking water, first check if the fill or drain hoses are loose at the tap or washer and tighten them. Ensure that your house drain pipes are not clogged. Verify that the water supply is adequate by checking another tap in the house and fully open the water supply tap. Inspect the water inlet hoses for kinks and straighten them if necessary. Also, check and clean the filter of the inlet hose(s). Finally, inspect the drain hose for any kinks or clogs, and clean the drain filter if it's clogged.
Why is my LG Washing machine making a rattling and clanking noise?
Rattling and clanking noises can occur in your LG Washing machine due to several reasons. There may be foreign objects like coins or safety pins in the drum or pump, so stop the washer and check both. Heavy wash loads can also produce a thumping sound, which is usually normal. Ensure all transit bolts and packing have been removed from the installation. Also, check if all the feet are resting firmly on the ground; if not, the washer may be out of balance, so stop and redistribute the wash load. If the wash load is unevenly distributed in the drum, stop the washer and rearrange it.
What to do if water overfills in my LG Washing machine?
Close the water tap. Unplug the power plug. Call for service.
Why is my LG Washing machine fabric softener overflowing?
An overflow of fabric softener in your LG Washing machine is usually caused by using too much softener. Follow the softener guidelines to ensure the appropriate amount is used, and do not exceed the maximum fill line.
Why is my LG Washing machine dispensing softener too early?
To prevent the softener from dispensing too early in your LG Washing machine, close the dispenser drawer slowly and do not open the drawer during the wash cycle.
What to do if my LG Washing machine motor is overloaded?
If your LG Washing machine motor is overloaded, allow the washer to stand for 30 minutes to cool the motor, then restart the cycle.
What to do if my LG Washing machine experienced a power failure?
If your LG Washing machine experienced a power failure, restart the cycle.
General| Energy Rating | A+++ |
|---|---|
| Spin Speed | 1400 RPM |
| Color | White |
| Inverter Motor | Yes |
| Smart Diagnosis | Yes |
| Child Lock | Yes |
| Dimensions (H x W x D) | 850 x 600 x 590 mm |
| Programs | Cotton |
| Delay Start | Yes |
Explains the advanced motor and drum action features for enhanced washing.
Covers features that minimize creases and automatically heat water for cycles.
Details energy-saving wash system and noise reduction technology.
Explains how the Child Lock prevents accidental setting changes during operation.
Explains the safety alert symbol and the meanings of DANGER, WARNING, and CAUTION.
Lists precautions to reduce the risk of fire, electric shock, or injury.
Details the importance and procedure for grounding the appliance for electrical safety.
Details like size, weight, capacity, power, water consumption, and pressure.
Lists included accessories like inlet hoses and spanner for installation.
Steps to safely remove the washing machine from its packaging and transit bolts.
Guidelines for selecting a suitable location, including floor level and clearance.
Advice on placing the washer on a flat floor, ensuring air circulation, and avoiding specific locations.
Procedures and precautions for connecting the washer to the power supply safely.
Detailed steps for connecting the water inlet hose to the tap.
Steps to connect the water hose to the washing machine, including hot water connection.
How to install the drain hose to prevent leaks and ensure proper drainage.
Steps and checks to ensure the washer is level and stable for optimal performance.
Advice for installing on concrete, tile, and wooden floors to manage vibration.
A step-by-step guide to starting a wash cycle, from sorting to pressing start.
Instructions on checking care labels, sorting laundry, and preparing clothes for washing.
A guide to recommended programs, fabric types, temperatures, and maximum loads.
Guidance on selecting water temperature and information about test procedures.
Explains available optional functions like Time Delay, Crease Care, and Rinse variations.
Information regarding the Woolmark approval for the wool wash cycle.
Table showing maximum spin RPM for each washing program.
Describes the overall control panel, including buttons, dials, and the LED display.
Explains the functions of the Power, Program Dial, and Start/Pause buttons.
How to use option buttons to add features to selected cycles.
Details what the LED display shows, such as settings and time remaining.
How to set a delayed start for the washing machine.
How to store and reuse a customized wash cycle.
How to select the Crease Care option to prevent wrinkling.
How to use the Pre Wash course for heavily soiled laundry.
Explains Medic Rinse, Rinse+Spin, Time Save, and Intensive options.
Details different rinse cycle options like Rinse++Hold and Normal+Hold.
How to select water temperature and use functions like Rinse+Spin.
How to lock the control panel and enable/disable audible beeps.
How to use the special cycle to clean the inside of the washing machine.
Explanation of the door lock safety feature and the laundry detecting function.
Diagram and explanation of the detergent and fabric softener dispenser drawer.
WARNINGs and notes about using appropriate detergent amounts and types.
Instructions on filling and using fabric softener correctly to avoid staining.
Further advice on detergent usage, including liquid vs. powder and quantity adjustments.
How to use water softeners and detergent tablets.
Steps to clean the water inlet filter to prevent clogging and ensure water supply.
How to clean the drain pump filter to remove debris and ensure smooth drainage.
Instructions for removing and cleaning the detergent dispenser drawer.
Advice on cleaning the washing drum, exterior, and interior components.
Instructions for storing the washer in freezing temperatures to prevent damage.
A table of symptoms, possible causes, and solutions for common issues like noise and leaks.
Solutions for when the washer fails to start or spin correctly.
Troubleshooting for door lock problems and wash cycle time delays.
Solutions for fabric softener overflow or dispensing too early.
Explains common error codes (IE, DE, UE, LE, FE, PE, PF) and their solutions.
Instructions on how to use the SMARTDIAGNOSIS™ feature for remote troubleshooting.
