EasyManua.ls Logo

LG WD14071SD6 - User Manual

LG WD14071SD6
40 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
OWNER’S MANUAL
WASHING MACHINE
WD14070SD6
WD14071SD6
MFL67473309
www.lg.com
Before beginning installation, read these instructions carefully.
This will simplify installation and ensure that the washer is installed
correctly and safely. Leave these instructions near the washer
after installation for future reference.

Table of Contents

Questions and Answers

  • K
    Kimberly ScottAug 13, 2025
    Why is my LG WD14071SD6 Washer leaking water or not draining properly?
    • P
      patriciacooperAug 13, 2025
      If your LG Washer is leaking water, oversudsing, or experiencing slow filling or draining, start by checking and tightening hose connections at the tap or washer, as fill or drain hoses may be loose. Ensure your house drain pipes are not clogged; unclog them or contact a plumber if needed. Verify adequate water supply by checking another tap in the house and ensure the water supply tap is fully open. Inspect water inlet hoses for kinks and straighten them. Check and clean the filter of the inlet hose(s) if clogged. Also, inspect the drain hose for kinks or clogs, cleaning and straightening it as necessary. Finally, clean the drain filter if it's clogged.
  • D
    daviswarrenAug 17, 2025
    What to do if my LG Washer won't start or spin?
    • J
      Jose VincentAug 17, 2025
      If your LG Washer won't start or spin, ensure the electrical power cord is securely plugged into the wall outlet. Check your house fuse or circuit breaker and reset it if necessary, but do not increase the fuse capacity. Make sure the water supply tap is turned on. Close the door properly and press the Start/Pause button. Note that it may take a few moments for the washer to begin spinning after pressing the Start/Pause button. If the washer still won't spin, the door must be locked before spin can be achieved. For balance issues, add one or two similar items to balance the load or rearrange the load to allow proper spinning.
  • A
    Alexander ReedAug 20, 2025
    How to prevent fabric softener overflow in my LG WD14071SD6?
    • T
      Troy MillerAug 20, 2025
      If you're experiencing fabric softener overflow in your LG Washer, it may be due to using too much softener. Follow the softener guidelines to ensure you are using the appropriate amount and do not exceed the maximum fill line.
  • J
    jamiewrightAug 25, 2025
    Why is fabric softener dispensing too early in my LG WD14071SD6?
    • A
      Amanda JarvisAug 25, 2025
      If softeners are dispensed too early in your LG Washer, close the dispenser drawer slowly and avoid opening it during the wash cycle.
  • J
    Jacqueline ThompsonAug 27, 2025
    What to do if my LG Washer experienced a power failure?
    • J
      Jacob TranAug 28, 2025
      If your LG Washer experienced a power failure, restart the cycle.
  • J
    Jessica SmithSep 1, 2025
    What to do if my LG WD14071SD6 Washer is overfilling with water?
    • R
      Rachael MooreSep 1, 2025
      If water overfills in your LG Washer due to a faulty water valve, close the water tap, unplug the power plug, and call for service.
  • G
    George JohnsonSep 4, 2025
    How to fix rattling or vibrating noise in LG Washer?
    • K
      Kevin PhillipsSep 5, 2025
      To resolve rattling, clanking, thumping, or vibrating noises in your LG Washer, first stop the appliance and inspect the drum and drain filter for foreign objects like coins or safety pins. Heavy wash loads can also cause thumping sounds, which are usually normal. If the noise persists after restarting, or the washer seems out of balance, stop the washer and redistribute the load. Also, ensure that transit bolts were removed during installation, referring to the Installation guide if needed. An unevenly distributed wash load can also cause these noises; stop the washer and rearrange the load.
  • J
    Jennifer WalkerSep 8, 2025
    What to do if my LG WD14071SD6 shows an overload in motor?
    • J
      Jeffrey GarciaSep 8, 2025
      If your LG Washer experiences an overload in the motor, allow the washer to stand for 30 minutes to cool the motor, then restart the cycle.

Summary

Important Safety Instructions

Safety Alert Symbols and Warnings

Explains DANGER, WARNING, CAUTION symbols and their meanings for user safety.

Basic Safety Precautions

Essential guidelines for safe operation, handling, and maintenance of the washing machine.

Grounding and Electrical Safety

Instructions for proper grounding and electrical connection safety to prevent shock.

Installation Guide

Unpacking and Preparation

Steps to unpack the washer and remove shipping restraints like packing and transit bolts.

Site Requirements

Guidelines for installation location, power outlet, clearance, and electrical connection.

Connecting Water and Drain Hoses

Detailed steps for connecting the water supply and drain hoses correctly.

Leveling and Floor Stability

Procedures to level the machine and considerations for different floor types to prevent vibration.

How to Use Your Washer

Starting a Wash Cycle

Laundry Preparation and Programs

Wash Cycle Options and Controls

Troubleshooting and Error Codes

Diagnosing Common Problems

Understanding Error Messages

Using Smart Diagnosis Feature

LG WD14071SD6 Specifications

General IconGeneral
Washing Capacity7 kg
Spin Speed1400 rpm
Energy RatingA+++
Dimensions (W x H x D)600 x 850 x 550 mm
Weight62 kg
ColorSilver
Inverter MotorYes
TypeFront Load
ProgramsBaby Care, Rinse+Spin

Related product manuals