LG WD12570FD - Child Lock

18
ow to use washer
H
Rinse
• By pressing the Rinse
button, the Rinse type can
be selected.
- Normal
- Rinse
+
- Medic Rinse
- Normal+Hold
- Rinse
+
+Hold
• Allergy Care, Baby care performs 4 Rinses.
• Cotton, Synthetic, Duvet, Hand Wash/Wool
performs 3 Rinses
• Cotton Quick, Quick 30 performs 2 Rinses.
• Used to additional rinse, which may assist in
removing traces of detergent residue.
• By selecting Rinse
+
or Medic Rinse
function, the Rinse Time and the Rinse
water are increased.
• Medic Rinse includes water heating in the
last rinse.
• Is selected by pressing the Rinse button
repeatedly this function leaves clothes in the
washer; suspended in the water after a rinse
without entering into spin.
• To proceed to a Drain or Spin function after
a Rinse hold, select Drain on the program
dial or press the Spin selector button to the
desired speed, then press the Start/Pause
button.
The required lamp will light up for
identification.
Child lock
If you choose to lock the buttons on the
control assembly to prevent tampering, this
function may be selected.
• Child lock can be set by pressing and
holding the Option and Rinse button
simultaneously. (About three seconds)
• When child lock is set, all buttons are inoperable
except for power button.
• When child lock is set, and remaining
time are displayed by turns.
• To deactivate Child lock system, press and
hold the Option and Rinse button
simultaneously again. (About three seconds)
• To change to the desired program, whilst in
child lock mode.
1. Press and hold both Option and Rinse
button together once again.
(About three seconds)
2. Press the Start/Pause button.
3. Select the desired program and press the
Start/Pause button again.
• The child lock can be set at any time and it
is automatically canceled when operational
errors occur.
Change
the desired
program
1. Normal
2. Rinse
+
& Medic Rinse
3. Rinse Hold