19
ow to use washer
H
• If the machine encounters a fault during
operation, the associated fault will be
displayed.
“ ” : Water pressure sensing error
“ ” : Problem of overfilling water
“ ” : Door is not closed
“ ” : Water inlet trouble
“ ” : Drainage trouble
“ ” : Unbalanced load
“ ” : Water temperature trouble
“ ” : Over load in motor
“ ” : Over load in motor
“ ” : Water leaks
If these error letters are displayed, please refer
to the troubleshooting page23 and follow the
guide.
Display
• When child lock is selected, the
“ ” is displayed.
• When time delay is selected, it shows the
remaining time to finish the selected
program.
• When washing cycle is completed,
“ ” is displayed on the “Multi
display”.
• During washing cycle, the remaining
washing time is displayed.
• Recommended program by
manufacturer.
( ) : WD-12360(5)TD
- Cotton (95˚C) :
around 1 hour and 37(35) minutes
- Cotton (60˚C) :
around 1 hour and 33(31) minutes
- Synthetic (60°C) :
around 1 hour and 26 minutes
- Eco (60°C) :
around 1 hour and 53(51) minutes
- Delicate (40°C) : around 58 minutes
- Wool (40°C) : around 56 minutes
- Hand Wash (30°C) : around 49 minutes
- Quick 30 (30°C) : around 30 minutes
- Rinse+ Spin : around 26(24) minutes
- Drain : around 1 minute
• The washing time may vary by the
amount of laundry, water pressure,
water temperature and other washing
conditions.
• If an unbalanced load is detected or if
the suds removing program operates,
the wash time may be extended.
(Max. increasing time is 45 minutes.)
1. Special function display
3. Completion of washing
4. Time left
2. Self diagnosis display
To Next Page
Loading...
