LG WK22 S6 Series - Drain Hose Installation; Standpipe Drain Hose Installation; Laundry Tub Drain Hose Installation

29
INSTALLATION
ENGLISH
Installing the Drain Hose
Using a Standpipe to Drain
1 Clip the end of the hose into the elbow bracket.
• Connect the elbow bracket
a within 10 cm
of the end of the drain hose. If the drain hose
is extended more than
10 cm beyond the
end of the elbow bracket, mold or
microorganisms could spread to the inside
of the washer.
2 Insert the end of the drain hose into the
standpipe.
3 Use the provided tie strap b to secure the
drain hose in place.
4 If the water valves and drain are built into the
wall, fasten the drain hose to one of the water
hoses with the provided tie strap
c (ribbed
side on inside).
Using the Laundry Tub to Drain
1 Clip the end of the hose into the elbow bracket.
• Connect the elbow bracket
a within 10 cm
of the end of the drain hose. If the drain hose
is extended more than
10 cm beyond the
end of the elbow bracket, mold or
microorganisms could spread to the inside
of the washer.
2 Hang the end of the drain hose over the side of
the laundry tub.
4 "
(10 cm)
29.5 - 96 "
(75 - 244 cm)
29.5 - 96 "
(75 - 244 cm)
4 "
(10 cm)