•
•
•
LED display
Display the estimated remaining time
(Hour : minute) to finish.
In case of abnormal operation.
error indications are displayed
(IE, OE, UE, dE, tE, FE, PE, LE, PF)
See troubleshooting guide.
Option buttons
• The option buttons allow you to
select additional cycle options and
will light when selected. Certain
buttons also allows you to activate
special function by processing and
holding the button for 3 seconds.
•
Cycle setting buttons
Use these buttons to select the desired
cycle options for the selected cycle.
Press the button for that setting until
the indicator light for the desired
value is it.
•
•
Spin Selector knob
To change the spin speed. turn the
spin knob to cycle through available
options.
•
To Next Page
Loading...
