LG WM1812CW - Page 33

32
SENSOR ASSEMBLY(BALL SENSOR)
①①
Unscrew the 4 screws from the back cover.
②②
Unscrew the single screw from the lower-right
side of the cabinet.
③③
Disconnect the connector from PWB Harness.
THERMISTOR
①①
Disassemble the Back cover.
②②
Unscrew a screw from the Tub.
③③
Unplug the white connector from the thermistor.
④④
Pull it out by holding the bracket of the
thermistor.
CONNECTOR